Linux sh52.ich-4.com 5.14.0-611.26.1.el9_7.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Jan 29 05:24:47 EST 2026 x86_64
LiteSpeed
Server IP : 198.143.147.58 & Your IP : 216.73.217.21
Domains :
Cant Read [ /etc/named.conf ]
User : actualbuzz
Terminal
Auto Root
Create File
Create Folder
Localroot Suggester
Backdoor Destroyer
Readme
/
opt /
ipmicfg /
IPMICFG_1.34.1_build.221026 /
DOS /
Delete
Unzip
Name
Size
Permission
Date
Action
DCMICap.dat
5
KB
-rwxrw-rwx
2022-10-26 06:17
GenEvt.dat
18.46
KB
-rwxrw-rwx
2022-10-26 06:17
IPMICFG.exe
535.16
KB
-rwxrw-rwx
2022-10-26 06:17
MBType.dat
29.72
KB
-rwxrw-rwx
2022-10-26 06:17
MRCCode.dat
7.32
KB
-rwxrw-rwx
2022-10-26 06:17
MRCCode2.dat
10.82
KB
-rwxrw-rwx
2022-10-26 06:17
MRCCode3.dat
18.78
KB
-rwxrw-rwx
2022-10-26 06:17
Menu.dat
8.18
KB
-rwxrw-rwx
2022-10-26 06:17
OEMEvt.dat
155.36
KB
-rwxrw-rwx
2022-10-26 06:17
PBStatus.dat
2.75
KB
-rwxrw-rwx
2022-10-26 06:17
SenType.dat
1.63
KB
-rwxrw-rwx
2022-10-26 06:17
SpecEvt1.dat
20.38
KB
-rwxrw-rwx
2022-10-26 06:17
SpecEvt2.dat
32.47
KB
-rwxrw-rwx
2022-10-26 06:17
SpecEvt3.dat
34.06
KB
-rwxrw-rwx
2022-10-26 06:17
SpecEvt4.dat
164.91
KB
-rwxrw-rwx
2022-10-26 06:17
SpecEvt5.dat
90.41
KB
-rwxrw-rwx
2022-10-26 06:17
Save
Rename
-m Shows IPv4 address and MAC. -m <ip> Sets IPv4 address (format: ###.###.###.###). -a <mac> Sets MAC (format: ##:##:##:##:##:##). -k Shows Subnet Mask. -k <mask> Sets Subnet Mask (format: ###.###.###.###). -dhcp Gets the DHCP status. -dhcp on Enables the DHCP. -dhcp off Disables the DHCP. -g Shows a Gateway IP. -g <gateway> Sets a Gateway IP (format: ###.###.###.###). -garp on Enables the Gratuitous ARP. -garp off Disables the Gratuitous ARP. -r Performs a BMC cold reset. Detects if a BMC reset was successfully performed on the IPMI device, use -d after -r. -fd <option> Resets to the factory defaults without preserving configurations. option: 1 | Preserves User configurations option: 2 | Restores to factory default and default password option: 3 | Sets user defaults to ADMIN/ADMIN -fdl Resets IPMI to the factory default. (Clean LAN). -fde Resets IPMI to the factory default. (Clean FRU & LAN). -d Detects if a BMC reset was successfully performed on the IPMI device. Note that this option can be only used after -r, -fd, -fdl or -fde -ver Gets firmware revision. -vlan Gets VLAN status. -vlan on [VLAN tag] Enables the VLAN and sets the VLAN tag. If VLAN tag is not given, it uses the previously saved value. -vlan off Disables the VLAN. -selftest Checks and reports the basic health status of the BMC. -raw Sends a RAW IPMI request and prints a response. Format: NetFn/LUN Cmd [Data1 ... DataN] -fru info Shows information of the FRU inventory area. -fru list Shows all FRU values. -fru cthelp Shows chassis type code. -fru help Shows help of FRU Write. -fru <field> Shows FRU field value. -fru <field> <value> Writes FRU. -fru backup <file> Backs up FRU to a file <Binary format>. -fru restore <file> Restores FRU from a file <Binary format>. -fru tbackup <file> Backs up FRU to a file <Text format>. -fru trestore <file> Restores FRU from a file <Text format>. -fru ver <v1> <v2> Gets/Sets the FRU version. (<v1> and <v2> are BCD-format) -sel info Shows SEL information. -sel list Shows SEL records. -sel del Deletes all SEL records. -sel raw Shows SEL raw data. -sdr [full] Shows SDR records and readings. -sdr del <sdr id> Deletes the SDR record. -sdr ver <v1> <v2> Gets/Sets the SDR version. (<v1> and <v2> are BCD-format) -nm nmsdr Displays NM SDR. -nm seltime Gets SEL time. -nm deviceid Gets the ID of the ME device. -nm reset Reboots ME. -nm reset2default Forces ME to reset to default settings. -nm updatemode Forces ME to enter the update mode. -nm selftest Gets self-test results. -nm listimagesinfo Lists ME information of images. -nm oemgetpower OEM Power command for ME. -nm oemgettemp OEM Temp. command for ME. -nm pstate Gets the maximum allowed CPU P-State. -nm tstate Gets the maximum allowed CPU T-State. -nm cpumemtemp Gets CPU/memory temperature. -nm hostcpudata Gets the host CPU data. -fan Gets the fan mode. -fan <mode> Sets the fan mode. -pminfo [full] Displays PMBus health information of power supply. -psfruinfo Displays FRU health information of power supply. -psbbpinfo Displays status of the backup battery. -autodischarge <module> Sets auto discharge by days. <day> -discharge <module> Manually discharges a battery. -user list Lists user privileges. -user help Shows a user privilege code. -user add <user id> <name> Adds a user. <password> <privilege> -user del <user id> Deletes users. -user level <user id> Updates user privileges. <privilege> -user setpwd <user id> Updates a user password. <password> -conf download <file> Downloads IPMI configuration to a binary file. -conf upload <file> Uploads IPMI configuration from a binary file. <option> option: -p | Bypass warning message -conf tdownload <file> Downloads IPMI configuration to a text file. -conf tupload <file> Uploads IPMI configuration from a text file. <option> option: -p | Bypass warning message -clrint Clears chassis intrusion. -reset <index> Resets system and forces to boot from the selected device. -soft <index> Initiates a soft-shutdown for OS and forces system to boot from the selected device. -ipv6 mode Shows the IPv6 mode. -ipv6 mode <mode> Sets the IPv6 mode. -ipv6 autoconfig Shows IPv6 auto configuration. -ipv6 autoconfig on Enables IPv6 auto configuration. -ipv6 autoconfig off Disables IPv6 auto configuration. -ipv6 list Lists IPv6 static and dynamic addresses. -ipv6 duid Shows IPv6 DUID. -ipv6 dns [ip] Gets/Sets IPv6 DNS server. -ipv6 add <id> <ip> Adds IPv6 static address. <prefix> -ipv6 remove <id> Removes IPv6 static address. -ipv6 route Displays IPv6 static route. -ipv6 route on Enables IPv6 static route. -ipv6 route off Disables IPv6 static route. -ipv6 route list Lists IPv6 static router information. -ipv6 route <id> <prefix Sets IPv6 static router information. value> <prefix length> <ip> -ipv6 route clear <id> Clears IPv6 static router information. -tp info Gets MCU information. -tp info <type> Gets information of MCU type. (type: 1 - 3) -tp nodeid Gets a node ID. -tp systemname [value] Gets/Sets a system name. -tp systempn [value] Gets/Sets a system P/N. -tp systemsn [value] Gets/Sets a system S/N. -tp chassispn [value] Gets/Sets a chassis P/N. -tp chassissn [value] Gets/Sets a chassis S/N. -tp backplanepn [value] Gets/Sets a backplane P/N. -tp backplanesn [value] Gets/Sets a backplane S/N. -tp nodepn [value] Gets/Sets node P/N. -tp nodesn [value] Gets/Sets node S/N. -summary Displays FW and BIOS information. -hostname [value] Gets/Sets a host name. -dcmi cap Lists information of DCMI capabilities. -dcmi power Gets the DCMI power readings. -dcmi ctl [value] Gets/Sets the DCMI management controller ID string. -mel list Shows BMC maintenance event log. -mel download <file> Downloads a BMC maintenance event log to a file. -mel clear Clears a BMC maintenance event log. -addrptl [option] Gets/Sets IP address protocol. option: 1 | IPv4 option: 2 | IPv6 option: 3 | Dual -lockdown Checks the system's lockdown mode. -lani [option] Gets/Sets LAN interface. -linkstatus Shows network link status.